Laboratory studies on bedload transport under unsteady flow conditions

Rok, strany: 2018, 23 - 31

Two sets of triangular hydrographs were generated in a 12-m-long laboratory flume for two sets of initial bed conditions: intact and water-worked gravel bed. Flowrate ranging from 0.0013 m3 s–1 to 0.0456 m3 s–1, water level ranging from 0.02 m to 0.11 m, and cumulative mass of transported sediment ranging from 4.5 kg to 14.2 kg were measured. Then, bedload transport rate, water surface slope, bed shear stress, and stream power were evaluated. The results indicated the impact of initial bed conditions and flow unsteadiness on bedload transport rate and total sediment yield. Difference in ratio between the amount of supplied sediment and total sediment yield for tests with different initial conditions was observed. Bedload rate, bed shear stress, and stream power demonstrated clock-wise hysteretic relation with flowrate. The study revealed practical aspects of experimental design, performance, and data analysis. Water surface slope evaluation based on spatial water depth data was discussed. It was shown that for certain conditions stream power was more adequate for the analysis of sediment transport dynamics than the bed shear stress. The relations between bedload transport dynamics, and flow and sediment parameters obtained by dimensional and multiple regression analysis were presented.

ISO 690:

Mrokowska, M., Rowiński, P., Książek, L., Strużyński, A., Wyrębek, M., Radecki-Pawlik, A. 2018. Laboratory studies on bedload transport under unsteady flow conditions. In Journal of Hydrology and Hydromechanics, vol. 66, no.1, pp. 23-31. 0042-790X (until 2019) .

APA:

Mrokowska, M., Rowiński, P., Książek, L., Strużyński, A., Wyrębek, M., Radecki-Pawlik, A. (2018). Laboratory studies on bedload transport under unsteady flow conditions. Journal of Hydrology and Hydromechanics, 66(1), 23-31. 0042-790X (until 2019) .